Globally Certified
Explosion Proof Cameras
Spectrum designs and manufactures a complete range of explosion-proof cameras certified for use in Class I Division 1 & 2, Zone 1 & 2, and equivalent international classifications. Fixed, dome, and PTZ configurations available for every hazardous area monitoring application.
Choose Your Camera Series
All Spectrum camera series are certified for Class I Division 1 & 2 and Zone 1 & 2 hazardous areas. Select the configuration that best fits your monitoring application.
Dome Cameras
Compact dome profile for space-constrained environments. Wide-angle fixed coverage ideal for process units, offshore platforms, and classified areas where a low-profile mount is required.
Fixed Cameras
Lightweight marine-grade aluminum housing for dedicated fixed-point monitoring. Lightfinder low-light technology and 4G/LTE connectivity options for remote and low-illumination environments.
PTZ Cameras
Full pan, tilt, and zoom control for wide-area monitoring of large facilities. 360° continuous pan enables a single unit to cover extensive areas of a platform, refinery, or industrial site.
2025 Product Catalog
Full specifications, certifications, dimensions, and technical data for the complete Spectrum camera range — D-Series, F-Series, TEZP/FEZB, and accessories.
Complete Your Installation
Beyond cameras, Spectrum offers explosion-proof junction boxes and accessories engineered to complete a certified hazardous area installation from end to end.
Explosion Proof Junction Boxes
Certified junction boxes for cable termination and electrical connections within classified hazardous areas. Compatible with Spectrum camera installations and third-party wiring systems.
Camera Accessories
Mounting brackets, cables, conduit fittings, and ancillary components for complete hazardous area camera installations. Engineered for compatibility with Spectrum camera series.
Manufacturer Direct.
Globally Certified.
Manufacturer, Not a Reseller
Spectrum designs and manufactures explosion-proof cameras. Direct access to engineering support, technical documentation, and certification packages — without a middleman.
Global Certifications
Cameras certified for North America (cFMus), Europe (ATEX), international markets (IECEx), and regional certifications including INMETRO, and PESO — covering hazardous area standards in over 50 countries.
Complete Product Range
Fixed, dome, PTZ cameras, junction boxes, and accessories — a full range of explosion-proof products to address every monitoring need within a classified hazardous area facility.
Engineering Support
Our team in Houston, TX assists with area classification questions, product selection, and certification documentation for project submittals — from initial specification through delivery.
Six Standards.
50+ Countries Covered.
Each certification is issued by an independent accredited body after physical testing of the equipment. Available certifications vary by product — see the matrix below for specifics by model.
FM Approvals
United States · Canada
FM Approvals certification covers both the US (cFMus) and Canadian (FM Canada) markets under the NEC/CEC Class/Division classification system. Required for facilities operating under NFPA 70 (National Electrical Code) for Class I Division 1 & 2 locations where flammable gases or vapors may be present.
NEC Articles 500–506 · Class I Division 1 & 2
ATEX Directive
European Union
ATEX (Atmosphères Explosibles) is the European Union directive governing equipment for use in explosive atmospheres. Certification is issued by a Notified Body following testing to IEC 60079 standards. Required for all electrical equipment installed in Zone 1 & 2 classified areas within the EU.
Directive 2014/34/EU · Zone 1 & 2
IECEx Scheme
50+ Countries Worldwide
The IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx) is the international standard accepted in over 50 countries as the global benchmark for explosion-protected equipment. Particularly important for projects in the Middle East, Asia-Pacific, and Africa.
IEC 60079 Series · Zone 1 & 2
INMETRO
Brazil
INMETRO (Instituto Nacional de Metrologia, Qualidade e Tecnologia) certification is required for explosion-proof electrical equipment used in classified hazardous areas in Brazil. Based on ABNT NBR IEC 60079 standards and mandatory for Brazil's large oil & gas, petrochemical, and mining sectors.
ABNT NBR IEC 60079 · Zone 1 & 2
PESO Approval
India
The Petroleum and Explosives Safety Organisation (PESO) regulates the use of explosion-proof electrical equipment in India's classified hazardous locations. PESO approval is required for equipment used in oil & gas, petrochemical, and mining facilities across India's rapidly growing industrial sector.
IS/IEC 60079 Series · Zone 1 & 2
Find the Right Camera
for Your Application
Tell us about your hazardous area classification, installation environment, and monitoring requirements. Our engineering team will help you select and specify the right certified solution.